Login





Team Xectuer ICEDCUBE GC Replacement Case


Labeled With  gamecube accessory
Written by HSDEMONZ on Monday, November 14 2005

One thing I noticed, is how true the fit is. With the other shell review, I noted the slight flex needed to make a fit. That isn't the case here. The plastic of this ICEDCUBE seems more rigid, and the mold/cut is definitely more true. They fit together cleanly and smoothly. This isn't a hard install, but it is time consuming, especially if you haven't done it before, or if you did and put every single screw back in. When I last had my Cube opened, I only put back the screws necessary to keep it solid and functional. One thing you'll have to do, is remove the heat sink from the motherboard of the GC. When I had originally chipped my GC, I didn't need to remove the motherboard, and didn't know that when you disassemble this bugger, the last 2 screws, are hidden, under the Heat sink.




Something I didn't think of at the time while testing this, was that once I had the Heat sink off, I probably should have cleaned it and applied some new thermal paste. The Cube only hade some on the GPU and not the CPU. Go figure. Anyways.. watch the video below, and you'll see the process of installing the ICEDCUBE. I really don't have anything bad to say about it.. which for me is a bit rare, and I'm pretty picky and can find flaws or issues with most things that come across my desk.






1 | 2 | 3 | 4 | Next Page >>

Related Articles:
 Pyramat S2000 Gaming Chair
 Charlie And The Chocolate Factory
 Gamecube Replacement Black Viper GC Case
 Ansmann 10 Hour PSP Battery Pack
 PSP Battery Shootout
 Datel PSP Max Media Manager


© 2017 GamersReports.com. All Rights Reserved. Privacy Policy